Jackson - fixed front flexible
frame goggle with shade 5 lens
$15.00 + applicable tax (NC/SC only)
Jackson - flexible
frame lift front goggle with shade 5 lens
$20.00 + applicable tax (NC/SC only)
Jackson Unigoggle - welding
goggle with Adjust-O-Lok headgear
$35.00 + applicable tax (NC/SC only)
Special
Blue safety lens
For use anytime Flux is required in the welding process,
This removes some of the orange flare that occurs during
flux/welding processes HOWEVER this lens provides Limited
EYE PROTECTION NOT FOR LONG TERM OR DAILY USE 1 HOUR
OR LESS DAILY ( Eye protection is limited to the shade
of GREEN lens that is used WITH the BLUE lens These
lenses must be used together and as with ANY lens Discontinue
use if ANY EYE discomfort is noticed )
Plastic 2" x 4-1/4"
Recommended shades #3 for aluminum, #4 or #5 for
Cast Iron
DO NOT use shades #3 or #4 for welding / cutting
steel
$20.00 each + applicable tax (NC/SC only)
blue filter, shade #3 green lens &
clear protective lens (for aluminum)
blue filter, shade #4 green lens &
clear protective lens (for cast iron)
$2.50 each + applicable tax (NC/SC only)
shade #3 (Size 2" x 4")
shade #4 (Size 2" x 4")
shade #5 (Size 2" x 4")
shade #10 (Size 2" x 4")
shade #11 (Size 2" x 4")
shade #12 (Size 2" x 4")
clear lens (Size 2" x 4")
$5.00 each + applicable tax (NC/SC only)
shade #3 (Size 4" x 5")
shade #4 (Size 4" x 5")
shade #5 (Size 4" x 5")
shade #10 (Size 4" x 5")
shade #11 (Size 4" x 5")
clear lens (Size 4" x 5")
MAGNIFIER LENSES
Select just like you do reading glasses (These fit
in most goggles)
$8.00 each + applicable tax (NC/SC only)
(2" x 4 1/4") Magnifier lens
(cheater) diopter .75
(2" x 4 1/4") Magnifier lens
(cheater) diopter 1.00
(2" x 4 1/4") Magnifier lens
(cheater) diopter 1.25
(2" x 4 1/4") Magnifier lens
(cheater) diopter 1.50
(2" x 4 1/4") Magnifier lens
(cheater) diopter 1.75
(2" x 4 1/4") Magnifier lens
(cheater) diopter 2.00
(2" x 4 1/4") Magnifier lens
(cheater) diopter 2.25
(2" x 4 1/4") Magnifier lens
(cheater) diopter 2.50
COBRA IR COBALT WELDING GLASSES and LENS
These Lenses are excellent for removing the
Yellow/Orange flare associated with the use of fluxes
AND the harmful rays of IR and UV. More Information
COBRA IR COBALT WELDING GLASSES
Great for Aluminum and all other types of Gas welding
and cutting lens. Made in the USA
$65.00 each + applicable tax (NC/SC only)
COBRA IR COBALT WELDING LENS
Standard size plastic lens -- Great for Aluminum and
all other types of Gas welding and cutting. Made in the
USA
$50.00 each + applicable tax (NC/SC only)
The TM2000 is an optically correct, emerald green glass
specially produced in small precise runs using rare
earth materials and platinum lined ovens.
The TM2000 is also suitable for ordinary torch welding
on steel, and 4130 Chromemoly, (which the plastic lenses
are not rated for), in addition to welding stainless,
cast iron, and monel. Available in 2" x 4-1/4"
Rectangles or Spectacles