Custom made for the DHC 2000
torch, these make it simpler to set the pressure to
the 4 psi required for our torch.
Oxygen single stage
Regulator pressure range 2-25
psi (gauge reads 4-60 psi)
with CGA-540(standard) tank connector
and "B" hose fitting.
$140.00 each + applicable tax (NC/SC only)
Oxygen 2 stage
2-25 psi with CGA-540(standard) tank connector
and "B" hose fitting.
Needed mostly for Chromoloy steel and extensive
aluminum building of tanks and aircraft parts.
$240.00 each + applicable tax (NC/SC only)
Acetylene Single Stage
POL (standard) tank connector and "B" hose fitting
$140.00 each + applicable tax (NC/SC only)
Cobra regulator Special Deal
#1
Buy BOTH
single stage regulators, one each, Oxy/Acetylene
and get a FREE USA made lightweight 3/16
in X 12.5 ft hose (a $20 value) plus a $15 discount
on each regulator, a total savings of $50
$280.00 each + applicable tax (NC/SC only)
Upgrade to 25 Foot Hose
$290.00 + applicable tax (NC/SC only)
Cobra regulator Special Deal
#2
Buy BOTH
the 2 stage Oxygenregulator and the single
stage Acetylene regulator and get a FREE
USA made lightweight 3/16 in X 12.5 ft hose (a $20
value) plus a $15 discount on each regulator, a
total savings of $50
$380.00 each + applicable tax (NC/SC only)
Upgrade to 25 Foot Hose
$390.00 + applicable tax (NC/SC only)
Regulator Accessories
Low Pressure Gauge 3/8
NPT Nipple 2" Face 0-31 PSI
( Will work for oxy or fuel, Made in China )
$15.00 each + applicable tax (NC/SC only)
Low Pressure Gauge 3/8
NPT Nipple 2.5" Face 0-31 PSI
